SIEDON Manufactures small foam compactor with the principle of auger compaction. The operator of the machine puts the used EPS foam blocks into the hopper. The knives inside the machine will crush the EPS foam blocks into smaller flakes. The flakes will be pushed into the compaction chamber and be compressed. There is a pressure adjustment device at the end of the out-feed which can adjust the volume reduction ratio.
People can benefit from this machine by reduce the size of the scrap EPS foam blocks and greatly save transportation cost. Electric components of this machine are CE or/and UL approved.
Advantages of Foam Cold Compactors:
- Recycle and get paid instead of paying for landfill
- Decreasing the costs of stocking, transporting and disposing
- Integrity of the material suitable for recycling
- Reducing man power
- Low operation and maintenance costs
- Affordable price
Features of Foam Compactors:
- Single phase 220V/110V
- Low power consumption
- Low noise and low dust
- Small size and high efficiency
- Safe and easy to operate
- Integrated waste physical status
- CE certified
Technical Parameters of Foam Compactors SP130:
| Parameter | Imperial | Metric |
| Electricity | 120V/60HZ | 230V/50HZ |
| Motor Power | 2 HP | 1.5 KW |
| Feed-opening Dimension | 14.2″*23.6″ | 360 mm*600 mm |
| Log Measurement | 5.12″*5.12″ | 130 mm *130 mm |
| Noise | <76dB | <76dB |
| Machine Size | 66.2″*17.3″*56.3″ | 1680 mm*440 mm*1430 mm |
| Compaction Ratio | 30:1 | 30:1 |
| Capacity | 88.25-176.5 cf/hr | 2.5-5.0 m3/hr |
| Output | 1b/hr | 15-20 kg/hr |
| Machine Weight | 1b | 200 kg |