Foam Compactor SP200

foam compactor

SIEDON newly manufactures EPS cold compactor with the principle of auger compaction. The operator of the machine puts the used EPS foam blocks into the hopper. The knives inside the machine will crush the EPS foam blocks into smaller flakes. The flakes will be pushed into the compaction chamber and be compressed. There is a pressure adjustment device at the end of the out-feed which can adjust the volume reduction ratio.

This is used to reduce the size of EPS foam so that to the scrap foam can be transported to a recycler more efficiently.

Electric components of this machine are CE or/and UL approved. The machine is made in China and we offer it with competitive price.

Advantages of EPS Cold Compactors:

  • Recycle and get paid instead of paying for landfill
  • Decreasing the costs of stocking, transporting and disposing
  • Integrity of the material suitable for recycling
  • Reducing man power
  • Low operation and maintenance costs
  • Affordable price

Features of EPS Foam Compactor:

  • Three phase 380V/460V
  • Low power consumption
  • Low noise and low dust
  • Small size and high efficiency
  • Safe and easy to operate
  • Integrated waste physical status
  • CE certified

Technical Parameters of EPS Foam Compactor SP200:

Parameter Imperial Metric
Electricity 480V/60HZ 400V/50HZ
Motor Power 5.3 HP 4 KW
Feed-opening Dimension 15.8″*23.6″ 400 mm*600 mm
Log Measurement 7.88″*7.88″ 200 mm*200 mm
Noise <76 dB <76 dB
Machine Size 106.4″*18.9″*57.9″ 2700 mm*480 mm*1470 mm
Compaction Ratio 40:1 40:1
Capacity 197.68-317.70 cf/hr 5.6-9.0 m3/hr
Output 0.023-0.035 ton 23-35 kg
Machine Weight 0.3 ton 300 kg

Leave a Reply

Your email address will not be published. Required fields are marked *