Small EPS Compactor -- Model SP130

How EPS Compactor Works

Hasswell Manufactures small EPS cold compactor with the principle of auger compaction. The operator of the machine puts the used EPS blocks into the hopper. The knives inside the machine will crush the EPS foam blocks into smaller flakes. The flakes will be pushed into the compaction chamber and be compressed. There is a pressure adjustment device at the end of the out-feed which can adjust the volume reduction ratio.
People can benefit from this machine by reduce the size of the scrap EPS foam blocks and greatly save transportation cost. Electric components of this machine are CE or/and UL approved.
The machine is made in China and the price of this small EPS compactor is less than 6,000 US dollars.

Advantages of EPS Cold Compactors

Recycle and get paid instead of paying for landfill
Decreasing the costs of stocking, transporting and disposing
Integrity of the material suitable for recycling
Reducing man power
Low operation and maintenance costs
Affordable price

Main Features the Model SP130 EPS Compactor

Single phase 220V/110V
Low power consumption
Low noise and low dust
Small size and high efficiency
Safe and easy to operate
Integrated waste physical status
CE certified

Technical Parameters of the Model SP130 EPS Compactor

Compaction ratio: up to 30:1 and reaching density of approximately 250 kg/cbm (15.6 lb/cbf)
Output: 15 to 20 kg/hr (32 to 42 lb/h), depending on the degree of melting, grain size, material density, and humidity of the EPS shaped parts that are processed.
Feed-opening dimension: 360*600mm (14.2"*23.6")
Block measurement: 130*130mm (5.12"*5.12")
Motor power: 1.5 KW (2 HP)
Noise: <76 dB
Machine Size: 1.5mX0.4mX1.3m (59"X16"X51")
Machine Weight: 220 kg (480 lb)